The stickers from Intel, AMD or those who tell us which operating system has the device, are present on almost all laptops. Dell, HP, Acer, Asus, Lenovo, Toshiba, etc. Brand. In most causes, they are placed on board the housing, near the keyboard, so every time the user opens the laptop flap not to forget what kind of processor is under the housing, what video card has and what operating system runs. Exception from “stamp” With the sticker I do the laptops from Apple. On MacBook, MacBook Pro and MacBook Air you will not see any sticker stuck on the housing.
Pe iHowTo.Tips it is an article which explains to us why they are not found on Apple devices and why they are present on other laptop models.
Unsightly and exposed to time degradation (especially since they are placed in areas easy to reach when we type), these are a pocket when we try to remove them from the housing. During the detachment process, scratches can appear on the surface of the housing, and if we finally manage to remove the sticker, we remain with a hard to remove.
Removing such a sticker can be done in several ways, Depending on the material from which the laptop housing is madeto. Before you start the job, we advise you to do this only if the stickers are very damaged or if the laptop is new. After a while, even the complete removal of the stickers leaves traces on the housing. Especially the plastic ones, made of white material. The white plastic, in time begins to gain a yellow color, and if we remove the sticker, we will notice that there are traces where it was stuck.
Unaesthetic. So it is best to detach the stickers when the laptop is new.
How can we detach the Intel Inside, Windows or Nvidia stickers on the case of a laptop
It is best to use a hard plastic scraper, which will not scratch the housing. It starts from a corner of the sticker. After a sufficient portion was detached as we can catch the sticker, we pull slowly, but with the force of it, until it is removed. Do not use knife blades, screws or other metal objects that can damage the housing.
In most cases, after removal of the sticker remains glued on the housing. And this is quite difficult to remove, but not impossible. Use wet towels with alcohol and rub the area until the glue is removed. It can take good minutes.
Another version, is Using a detergent for dishes. Do not use strong detergents like the cleaning, toilet, stainless steel or tiles / tile. The latter can damage the plastic of the housing or even aluminum.
The result looks like this:
Of course, not only these two are the safe methods. If you have other suggestions or if you have tried other methods that have given results, we are waiting for you in the comments. :-)
